ESP32-BlueJammer by emensta

README.md

@@ -59,30 +59,29 @@ If you are looking forward to purchasing a finished, working, pre-built ESP32 Bl
 
 ## Hardware
 
-- **Required:**  
+### Required:
 
-  ESP32 Dev Module (such as ESP32-WROOM-32U, any ESP32 should work as long as it has the needed pins!)  
+- **ESP32 Dev Module** (such as ESP32-WROOM-32U, any ESP32 should work as long as it has the needed pins!)
-  nRF24L01+PA+LNA (2x)  
+- **nRF24L01+PA+LNA** (2x)
-  10UF capacitor (2x) any voltage above 5V  
+- **10uF Capacitor** (2x) (any voltage above 5V)
 
+### Additional:
 
+- **3rd Antenna:** IPEX to SMA-F pigtail
 
-- **Additional:**  
+### If you're looking to add a battery:
 
-  3rd antenna:
+- **3.7V Li-Ion Battery**
-  IPEX to SMA-F pigtail  
+- **JST PH 2.0 Connector**
+- **TP4056 Charging Module**
+- **3mm LED** (blue)
+- **4.7k Ohm Resistor**
+- **Mini Slide Switch**
 
-If you're looking to add a battery:  
+### To screw the 3D printed case together you must have:
-  3.7V Li-Ion battery  
-  JST PH 2,0 connector  
-  TP4056 Charging Module  
-  3mm LED (blue)  
-  4,7k Ohm resistor  
-  mini slide switch  
 
-To screw the 3D printed case together you must have:  
+- **M3x16 Screws** (2x)
-  M3X16 screws (2x)  
+- **M3 Nuts** (2x)
-  M3 Nuts (2x)